Description
About the ASI SI Series Surface Insensitive Cyanoacrylate
ASI SI SeriesCyanoacrylate is a super glue used in applications that require fast cure speeds. The SI Series super glue is perfect for bonding difficult substrates, acidic surfaces, wood, PVC and substrates that containplasticizers like certain types of EPDM, etc.
The SI Series super glue from ASI is the go-to super glue for most applications where a strong, permanent bond and fast set times are required.
Benefits of the ASI SI Series Cyanoacrylates
- Bonds almost any substrate
- Faster than most super glues
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
Compare ASI SI 5 to
- 3M PRODUCTS CA-40
- ARON ALPHA 221 / 221F
- CHEMENCE SI-5
- HENKEL 8300
- HERNON 108
- LOCTITE 406
- PACER RX-5,
- PERMABOND 790
Compare ASI SI 30 to
- ARON ALPHA 231F
- CHEMENCE SI 50
- HERNON 124
- PACER RX 50
- PERMABOND 791
Compare ASI SI 120 to
- ARON ALPHA 232 / 202F
- CHEMENCE SI 100
- HERNON 135
- LOCTITE 401
- PACER RX 100
- PERMABOND 792
Compare ASI SI 500 to
- 3 BOND 1786
- ARON ALPHA 252F /282F
- BOSTIK 7433
- CHEMENCE SI 600
- CIBA-GEIGY C – 11
- HERNON 134
- LOCTITE 447
- LORD R
- PACER RX 500
- PERMABOND 795
Compare ASI SI 1500 to
- CHEMENCE SI 1500
- PACER RX 700
- PERMABOND 798
Compare ASI SI 2000 to
- PERMABOND 799LV
Compare ASI SI 4000 to
- ARON ALPHA 253TX
- PERMABOND 799
Compare ASI SI GEL to
- CHEMENCE SI GEL
- HERNON 138
- LOCTITE 454
* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.
ASI SI Series Surface Insensitive Cyanoacrylate Specifications
- Color: Clear
- Viscosity: 120 cps
- Specific Gravity: 1.05
- Base: Modified Ethyl
ASI SI Series Chemical and Solvent Resistance
Percent of Strength Retained After Aging for 500 Hours
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 100%
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%
ASI SI Series Cure Time and Bond Strength By Substrate
- Steel 2100 psi
- Aluminum 1750 psi
- Neoprene 750 psi
- ABS 900 psi
- PVC 900 psi
- Polycarbonate 900 psi
- Phenolic 850 psi
ASI SI Series Cyanoacrylate Specifications by Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| SI 5 | 0.002 | 5 cps | 2800/4200 | -65 to 200 F | <5 Sec/8 Hours | Type II, Class 1 |
| SI 30 | 0.004 | 30 cps | 2800/4200 | -65 to 200 F | <5 Sec/8 Hours | Type II, Class 1 |
| SI 120 | 0.006 | 120 cps | 2800/4200 | -65 to 200 F | <8 Sec/8 Hours | Type II, Class 2 |
| SI 500 | 0.007 | 500 cps | 2800/4200 | -65 to 200 F | <8 Sec/8 Hours | Type II, Class 2 |
| SI 1000 | 0.008 | 1,000 cps | 2800/4200 | -65 to 200 F | <8 Sec/8 Hours | Type II, Class 3 |
| SI 1500 | 0.008 | 1,500 cps | 2800/4200 | -65 to 200 F | <8 Sec/8 Hours | Type II, Class 3 |
| SI 2000 | 0.009 | 2,000 cps | 2800/4200 | -65 to 200 F | <8 Sec/8 Hours | Type II, Class 3 |
| SI 3200 | 0.009 | 3,200 cps | 2800/4200 | -65 to 200 F | <10 Sec/8 Hours | Type II, Class 3 |
| SI 5000 | 0.009 | 5,000 cps | 2800/4200 | -65 to 200 F | <10 Sec/8 Hours | Type II, Class 3 |
| SI GEL | 0.01 | Gel | 2800/4200 | -65 to 200 F | <10 Sec/8 Hours | Type II, Class 3 |
ASI SI Series Cyanoacrylate Data Sheets
ASI SI Series Technical Data Sheets
- ASI SI 5 TDS
- ASI SI 30 TDS
- ASI SI 120 TDS
- ASI SI 500 TDS
- ASI SI 1000 TDS
- ASI SI 1500 TDS
- ASI SI 2000 TDS
- ASI SI 3200 TDS
- ASI SI 5000 TDS
- ASI SI GEL TDS
ASI SI Series Material Safety Data Sheet
- ASI SI SERIES MSDS
Reviews
There are no reviews yet.