Kant-Slam Hydraulic Gate Closer

Description

• The original Kant-Slam Hydraulic Gate Closer made by Hi-Lift.
• Made in the USA.
• Closes large or small gates up to 150 lbs, easily, gently, and smoothly.
• Will not slam your gate.
• Hydraulic action gives ample closing force at the latching point.
• Adjustment screw regulates closing speed.
• Complies with most pool gate legislation restrictions (check your local ordinance).
• Installs on side, top, middle or bottom of right or left hand gate.
• This heavy duty hydraulic gate closer mounts on opening side of door.
• This Kant-Slam hydraulic gate closer has a maximum opening angle of 90 degrees. The manufacturer recommends the use of a stop at 90 degrees to prevent damage to the slam closer.
• Mounting bracket measures 3-1/4″ by 1-3/4″.
• To see our import version of the Kant Slam style closerCLICKHERE

Notes:

• For the closer to work properly the surface of the post (where the closer is attached) must be flush with the surface of the gate.
• Not designed for high-frequency gates.