Heavy Duty European Concealed Hinge

Description

• European style hinge and mounting plate system for larger overlay doors on frameless cabinets.
• May be used on a face frame cabinet by “blocking out” behind the cabinet face frame.
• This concealed European hinge is made of two parts, a hinge and a mounting plate, that snap together.

Installation

• Works on door thicknesses of from 18 mm (23/32″) to 34 mm (approximately 1-5/16″). For door thicknesses over 30 mm, the edge of the door needs to be chamfered.
• For door overlays of from 20 mm (25/32″) to 25 mm (just under 1″)
• This European style hinge Requires a 40 mm cup drilled in the back of the door. Cup depth is 15 mm.
• Hinge is 3-way adjustable after installation.
• Click on links below for bore distance, door thickness, and overlay chart.
• This hinge is NOT a zero protrusion hinge:
  • The door when open does not clear the cabinet opening
  • It cannot be used with pull outs like drawers or pull out shelves
• Screws are not included. The hinge requires two #10 screws and the mounting plate requires four, for a total of six screws. Screw length varies depending on the thickness of your door and cabinet side wall. Note that our #10 screws come in packs of two.

Capacities

• Using 2 hinges per door:
  • Maximum door weight of 55 lbs
  • Maximum door width of 31-1/2″
• Using 3 hinges per door:
  • Maximum door weight of 88 lbs
  • Maximum door width of 35-7/16″