AXCO AX200 Bulk Glue Gun

Description

AXCO AX200 Bulk Glue Gun Overview

The AXCO AX200 All-Electric Hot Melt Gun simplifies the use of bulk hot melt, eliminating the need for a costly bulk tank. Designed to accommodate 43 mm. sticks, granulate, and pillows, the AX200 operates without the need for compressed air, boasting a robust 600 Watts of power that heats the unit to operational readiness in just five minutes. The ergonomic design features a large 8.4 oz. (250 ml) filling capacity with an easy-access filling hole to minimize spills and an adjustable trigger that enhances user comfort, reducing fatigue during prolonged use.

Features and Benefits

• Simple, fully electric design
• A single thermostat controls temperature settings up to 390F
• Accommodates stick or bulk adhesive – No special slugs needed – Simply remove the filler cap to refill when the unit is hot
• An eyehook is provided for suspension over a workbench or along an assembly line, allowing attachment to a spring balance (Optional Accessory)
• Features a drip-free dispensing nozzle
• With certain Hot Melts, one trigger pull can provide single runs of up to 25 ft.
• No cleaning is required – simply reheat the unit
• Unlike slug guns, this unit can dispense more adhesive at any time, as the hot melt is always in liquid form

Specifications

• Model: AX200
• Type: All-Electric Hot Melt Gun
• Recommended Melts: Hot-Melt Granulate, Pillows, and 43 mm. (1.7 in.) Sticks
• Power Supply: 230V AC/50 Hz
• Power Consumption: 600 Watts
• Current Consumption: 2.6 Amps
• Degree of Protection: I
• Class of Protection: IP 30
• Temperature Control: Thermostat
• Temperature Limitation: Temperature Controller
• Operating Temperature: 70F to 390F (20C to 200C)
• Temperature Constancy: 9F (5C)
• Heat up Time: Approx. 5 Minutes
• Tank Capacity: 8.4 oz. (250 ml.)
• Conveying System: Mechanics
• Length of Electric Cable: 6 ft. (1.8 m.)
• Weight: 2.7 lbs.