Description
About the ASI TS Series Cyanoacrylate Super Glue
ASI TS Series super glue is a toughened formulation meaning it has added properties to offer maximum impact resistance. This cyanoacrylate also has very good temperature resistance including standing up to thermo cycling between hot and cold transitions. The TS Series Cyanoacrylate is great for bondingdissimilarmaterials on a wide array of surfaces.
Compare ASI TS 2400 to
- HERNON 131
* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.
Benefits of the ASI SI Series Cyanoacrylates
- Bonds almost any substrate
- Faster than most super glues
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
ASI TS Series Cyanoacrylate Specifications
Properties
- Color: Clear/Opaque
- Viscosity: 300
- Specific Gravity: 1.10
- Base: ModifiedEthyl
ASI TS Series Chemical and Solvent Resistance
Percent of Strength Retained After Aging for 500 Hours
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 100%
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%ASI NI-M Series Cure Time and Bond Strength By Substrate
ASI TS Series Cure Time and Bond Strength By Substrate
- Steel 2100 psi
- Aluminum 1750 psi
- Neoprene 750 psi
- ABS 900 psi
- PVC 900 psi
- Polycarbonate 900 psi
- Phenolic 850 psi
ASI TS Series Cyanoacrylate Specifications by Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| TS 300 | 0.006 | 300 cps | 3750 | -65 to+250 F | <10 Sec/8 Hours | Type II, Class 2 |
| TS 800 | 0.008 | 800 cps | 3750 | -65 to+250 F | <15 Sec/8 Hours | Type II, Class 3 |
| TS 2400 | 0.01 | 2,400 cps | 3750 | -65 to+250 F | <15 Sec/8 Hours | Type II, Class 3 |
| TS 4000 | 0.01 | 4,000 cps | 3750 | -65 to+250 F | <18 Sec/8 Hours | Type II, Class 3 |
ASI TS Series Cyanoacrylate Data Sheets
ASI TS Series Technical Data Sheets
- ASI TS 300 TDS
- ASI TS 800 TDS
- ASI TS 2400 TDS
- ASI TS 4000 TDS
ASI TS Series Safety Data Sheet
- ASI TS SERIES MSDS
Reviews
There are no reviews yet.